Skip to content
Topvico Tuya WiFi Water Leak Detector & Alarm - Online Manual

Topvico Tuya WiFi Water Leak Detector & Alarm - Online Manual

At a Glance

Hub


Choose an outlet where with a good Wi-Fi signal, push the AC plug into the outlet and press any button to power it on.


Water Sensor


APP


Scan the QR code or find “Smart Life" / "Tuya Smart” from Google Play/APP Store to get the free application for Android or iOS. Upon installation of APP on your phone, the app will guide you through registering, connecting the hub to the internet.


Network Configuration & Match


Add your hub
1. Connect your smartphone to the WiFi router, open GPS of your smartphone

(The hub supports only a 2.4GHz Wi-Fi network. Therefore, ensure that your smartphone is also connected to a 2.4GHz Wi-Fi network during the setup process.).

2. Plug hub close to your WiFi router, put watersensor beside hub.

3.Login APP, tap "Add Device"or“+”.


4. Select"Sensors"tap "Alarm(Wi-Fi)'


5. Input your WiFi information, tap "Next"


6. On your hub, press and hold the configuration button until the blue
ight flashes quickly, then it is ready to be connected.


Tap"Confirm the indicator is blinking"


Tap"Blink Quickly"


Wait the configuration finishes, tap"Done"


Note
1. If the hub blink slowly, please press andhold the WiFi configuration button again,make sure it is blink quickly.
2. If can not make the light blink quickly, please tap"Blink Slowly", then follow the
guide of APP.


Water sensor pairing

To test the water sensor, placing the probe into water. If the red light flashes, it indicates that the sensor is functioning properly. In the event that there is no reaction, please open the battery cover and verify that the battery is correctly installed.
1. Tap the hub icon in app
2.Tap "Accessories"


3. Add Water sensor
Tap"+", then put the probes of water sensor in water.


4. Select correct device type for water sensor
In the Accessories page, tap the water sensor which you just add, choose"Water Leak", then tap"Confirm".

Light Ring

 What you see What it means
Blinking cyan Somebody visit (Doorbell)
Solid green Armed
Solid cyan Home armed
Nothing Disarmed
Blinking red Alarming
Blinking yellow Entry delay @ quickly, exit delay @ slowly
Blinking blue Wi-Fi connection configuration
Blinking purple Pairing/sniffer mode


Operation


Adjust Volume
In APP tap Settings > Volume level to select the level you want

You cannot set individual volume levels for each sensor. If you adjust the volume in the app, it will affect the volume of all the sensors.

Change Alarm Chime
In APP tap Settings> Alarm Chimes to select the tune you want

Alarm Duration
In APP tap Settings > Alarm Duration to select the voice alarm time you want

Tips: You can only set up the alarm chime after you have paired the sensor, and the setup will only apply to the last matched sensor. You'd better to select your favorate chime before match the next sensor. Or you delete the sensor and match again.

Arm/Disarm
You can arm and disarm your home using theremote tag or APP.
Attention: Only in arm mode, it will alarm when it is detected the water.

Or you can setup "Zone mode" to "24 hours", under this mode, system will send out alarm even you disarm in APP.


Power Down
To save power and turn the hub off, press and hold the Power Down Button until the light ring change to white and you hear four ticks from strong to weak.
Press any button to turn the hub on.


Reset
This process resets your hub to factory settings and removes all pairings.
Tap Settings > Factory reset in APP, or press and hold Reset Button until you hear two beeps and light ring change to purple, then the hub restarts.

Specifications


Hub
Power Supply: 110/220VAC
Backup Battery: 3.7V, 300mAh Lithium Battery
Consumption:<100mA@normal
Radio Frequency:433Mhz
Wi-Fi:IEEE802.11b/g/n
Volume Levels: 5(includes mute)
Sound Level(typical): 85dB
Expandable: up to 100 doorbell buttons / sensors and 10 remote tags
Operation Temperature:-10~55℃


FAQ:

- Q: Why is the light of the water sensor not flashing when the probes of the water sensor are placed in water?

- A: 1, Please kindly open the battery cover of the water sensor and ensure that the battery is properly installed. 
2, Test with a new battery.

-Q: How to make sure app get notification?

-A: 1, Smartphone need connect wifi or with network of sim card.
      2, Open permission for the app in smartphone, keep app work in background of smartphone.
      3, Some smartphones can setup special notification music for different app, please try it
      4, Water Sensor under the range of wifi hub.

-Q: Why can not connect wifi?

- A: If the wifi hub connected wifi, and need change to another wifi, please delete the hub from app list first.

-Q: How many smartphones can get notification same time? 

- A: The wifi hub can share to 20 app users, so 20 smartphones can get notification same time, but 1 app account only can login 1 smartphone, so different smartphone need register different app account.

-Q: Power failure notification?

- A:Yes, if the power supply of wifi hub failure, will get app notification.

- Q: Low battery alert?

- A: For the low battery alert, we did it before, but many customers feedback us with false alarm and cost battery faster, so the functions already removed,
the detector with battery save design, when detect water, only send signal one time, then stop, after the sensor dry, and detect water agin, will send out one signal again, so the battery can work more than 12 months, we suggest test the detector with water about one month one time.

 

-Q: What is the difference between "away arm" and "home arm"?

- A: You can setup some sensors to "home" mode in app, then if you setup the hub to "home arm", the sensors which under "home" mode will not send out alarm even been triggered.

It is designed to avoid false alarm when you at home.

Q: Want to get phone call or SMS message after press button?

A: It is optional with minimal additional cost in APP, and you have the option to purchase such as 10 to 50 calls or SMS notifications, helping you avoid unnecessary monthly expenses.

Support country: United States, Canada, Brazil, Mexico, Hong Kong SAR of China, Japan, South Korea, Thailand, Malaysia, Colombia, Poland, Chile, Argentina, United Kingdom, France, Germany, Spain, Russia, Belarus, Australia, Malta, Belgium, Italy, Portugal, Austria, Ireland, Netherlands, Czech Republic, Sweden, Norway, Denmark, Finland.

topvico wifi panic button caregiver pager with phone call sms message notificationtopvico wifi panic button caregiver pager with phone call sms message notificationtopvico wifi panic button caregiver pager with phone call sms message notification

- Q: (Samsung) How do I turn on notifications and lock screen notifications in the phone settings?

- A: (Samsung) How do I turn on notifications and lock screen notifications in the phone settings? (tuya.com)

- Q: (HUAWEI) How do I turn on notifications and lock screen notifications in the phone settings?

- A: (HUAWEI) How do I turn on notifications and lock screen notifications in the phone settings? (tuya.com)

- Q: (Xiaomi) How do I enable notification and lock screen notification on a Xiaomi mobile phone?

- A: How do I enable notification and lock screen notification on a Xiaomi mobile phone? (tuya.com)

Q: Download PDF manual?

Download PDF manual

Q: Need more accessories to the system?

A: Please check the page of accessories.

Or order in our Aliexpress store accessories.

Topvico water leak detector alarm sensor

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping